Presentations
-
A. Connor, R. Auerbach, E. English, S. Magarill, T. Rutherford, “Performance of LED as the illumination source for microdisplay rear projection TV,” Proc. Int. Disp. Workshops 12/2, 1907 (2005).
-
S. Magarill, E. English, B. Ardashnikov, “Multicolor edge function computation,” in Optical Modeling and Performance Prediction II, Mark A. Kahan, eds., Proc. SPIE 5867, 19 (2005).
-
J. K. Lawson, D. M. Aikens, R. E. English, Jr., W. T. Whistler, W. House, M. A. Nichols, “Surface figure and roughness tolerances for NIF optics and the interpretation of the gradient, P-V wavefront, and RMS specifications,” in Optical Manufacturing and Testing III, H. Philip Stahl, ed., Proc. SPIE 3782, 510 (1999).
-
D. Y. Wang, R. E. English, Jr., D. M. Aikens, “Implementation of ISO 10110 optics drawing standards for the National Ignition Facility,” in Optical Manufacturing and Testing III, H. Philip Stahl, ed., Proc.. SPIE 3782, 502 (1999).
-
J. K. Lawson, J. M. Auerbach, R. E. English, Jr., M.A. Henesian, J. T. Hunt, R. A. Sacks, J. B. Trenholme, W. H. Williams, M. J. Shoup III, J. H. Kelly, C. T. Cotton, “NIF optical specifications: the importance of the RMS gradient specification,” in Third International Conference on Solid State Lasers for Application to Inertial Confinement Fusion, W. H. Lowdermilk, ed., Proc. SPIE 3492, 336 (1999).
-
J. L. Miller, R. E. English, Jr., J. C. Schweyen, G. L. Peterson, “National Ignition Facility main laser stray light analysis and control,” in Third International Conference on Solid State Lasers for Application to Inertial Confinement Fusion, W. H. Lowdermilk, ed., Proc. SPIE 3492, 300 (1999).
-
J. L. Miller, R. E. English, Jr., R. J. Korniski, J. M. Rodgers, “Optical design of the National Ignition Facility main laser and switchyard/target area beam transport system,” in Third International Conference on Solid State Lasers for Application to Inertial Confinement Fusion, W. H. Lowdermilk, ed., Proc. SPIE 3492, 294 (1999).
-
R. E. English, Jr., J. L. Miller, J. Schweyen, “Ghost reflection analysis for the main laser of the National Ignition Facility,” in Proceedings of International Optical Design Conference 1998, L. R. Gardner, K. P. Thompson, eds., Proc. SPIE 3482, 748 (1998).
-
R. J. Korniski, R. E. English, Jr., J. L. Miller, “Spatial filter lens design for the main laser of the National Ignition Facility,” in Proceedings of International Optical Design Conference 1998, L. R. Gardner, K. P. Thompson, eds., Proc. SPIE 3482, 737 (1998).
-
R. E. English, Jr., J. L. Miller, L. G. Seppala, C. W. Laumann, “Optical system design of the National Ignition Facility,” in Proceedings of International Optical Design Conference 1998, L. R. Gardner, K. P. Thompson, eds., Proc. SPIE 3482, 726 (1998).
-
F. R. Holdener, E. Ables, E. S. Bliss, S. J. Boege, R. D. Boyd, C. J. Chocol, D. T. Davis, R. D. Demaret, R. E. English, Jr., C. W. Laumann, J. L. Miller, S. W. Thomas, “Beam control and diagnostic functions in the NIF transport spatial filter,” in Solid State Lasers for Application to Inertial Confinement Fusion: Second Annual International Conference, M. L. André, ed., Proc. SPIE 3047, 692 (1997).
-
J. K. Lawson, D. M. Aikens, R. E. English, Jr., C. R. Wolfe, “Power spectral density specifications for high-power laser systems,” Proc. SPIE 2775, 345 (1996).
-
R. E. English, Jr., L. G. Seppala, C. S. Vann, E. S. Bliss, “Use of an intermediate wavelength laser for alignment to inertial confinement fusion targets,” in Solid State Lasers for Application to Inertial Confinement Fusion, M. André and H. T. Powell, eds., Proc. SPIE 2633, 603 (1995).
-
R. E. English, Jr., D. M. Aikens, W. T. Whistler, C. D. Walmer, R. T. Maney, “Implementation of ISO 10110 optics drawing standards for the National Ignition Facility,” in Optical Manufacturing and Testing, V. J. Doherty and H. P. Stahl, eds., Proc. SPIE 2536, 51 (1995).
-
J.K. Lawson, C. R. Wolfe, K. R. Manes, J. B. Trenholme, D. M. Aikens, R. E. English, Jr., “Specification of optical components using the power spectral density function,” in Optical Manufacturing and Testing, V. J. Doherty and H. P. Stahl, eds., Proc. SPIE 2536, 38 (1995).
-
C. R. Wolfe, J. K. Lawson, D. M. Aikens, R. E. English, Jr., “Database of wavefront measurements for laser system modeling, optical component development, and fabrication process qualification,” in Interferometry VII: Applications, R. J. Pryputniewicz, G. M. Brown, and W. P. Jüptner, eds., Proc. SPIE 2545, 229 (1995).
-
S. J. Cohen, R. E. English, Jr., C. J. Stolz, J. R. Taylor, “Thermal analysis of transmissive elements in high-average-power laser beam delivery systems,” in High Heat Flux Engineering, A. M. Khounsary, ed., Proc. SPIE 1739, 400 (1993).
-
D. P. Gaines, G. E. Sommargren, S. P. Vernon, R. E. English, “X-Ray characterization of a three-element condenser system for SXPL,” in OSA Proceedings on Soft X-Ray Projection Lithography, Andrew M. Hawryluk and Richard H. Stulen, eds., Vol. 18, pp. 66-9 (Optical Society of America, Washington, DC 1993).
-
R. E. English, Jr., S. A. Johnson, “High Power Fiber Optic Delivery Systems,” Rep. UCRL-JC-108892 (Lawrence Livermore National Laboratory, Livermore, Calif., 1992), presented at DoD Fiber Optic Conference ’92, McLean, VA, March 23-27, 1992.
-
W. J. Rundle, E. S. Bliss, R. E. English, Jr., M. W. Kartz, R. L. Peterson, G. R. Thompson, D. M. Uhlich, “The design and performance of an automated video-based laser beam alignment system,” in Current Development in Optical Design and Optical Engineering II, R. E. Fischer, W. J. Smith, eds., Proc. SPIE 1752, 20 (1992).
-
M. Feldman, D. J. Mockler, R. E. English, Jr., J. L. Byrd, J. T. Salmon, “Self-referencing Mach-Zehnder interferometer as a laser system diagnostic,” in Active and Adaptive Optical Systems, M. A. Ealey, ed., Proc. SPIE 1542, 490 (1991).
-
R. E. English, Jr., J. M. Halpin, F. A. House, R. D. Paris, “Optical design of a high power fiber optic coupler,” in Current Developments in Optical Design and Optical Engineering, R. E. Fischer and R. L. Holman, eds., Proc. SPIE 1527, 174 (1991).
|
|